GVD M3 series, User Manual

Page: 15 / 197

Chapter 2 Installation
HD NVR User Manual 2-5
2-1-2 Install the HD NVR
2-1-2-1 HD NVR (M3 series)
To install the HD NVR, see the following steps:
Figure 2-5 Install the HD NVR (M3 Series)
1.
Connect the keyboard to the PS/2 keyboard connector.
2.
Connect the mouse to the USB 2.0 mouse connector.
3. Connect the VGA monitor to the VGA port.
4.
Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a hub or a switch the IP cameras have connected.
5. Plug in the speaker to the speaker port if necessary.
6.
Connect the power cord to the AC power socket at the rear panel of the unit. When
the power cord is pluged, the machine boots automatically.
7.
Turn on the power switch.