GVD M3 series, User Manual

Page: 43 / 197

Chapter 3 SSMT Program User Guide
HD NVR User Manual 3-11
3-6-2 Remove a hard disk from an existing volume
To remove a hard disk from an existing volume, see the following steps:
Figure 3-7 Remove a hard disk from an existing volume
1. In SCM program, click the preferred volume in the device panel.
2.
Click ‘ Disable ’ . The system shows a confirmation message – ‘ Are you sure you
want to disable this volume? ’ Click ‘ Yes ’ to continue.
3. Click ‘ Modify ’ . A ‘ Modify Volume ’ dialog appears.
4. Click the selected hard disk in the list of the Hard Disk in Volume, and click
‘ ’ . The selected hard disk has been removed from the list of ‘ Hard Disk in
Volume ’ .
5. Click ‘ OK ’ to continue. (Or click ‘ Cancel ’ to exit.)