GVD M3 series, User Manual

Page: 150 / 197

Chapter 6 Configuration Mode
6-12 HD NVR User Manual
3.
Click ‘ Add Manually ’ and then click ‘ Next ’ . An ‘ Add Manually ’ dialog appears.
4.
Get the IP address of the camera first before the channel is set. Select the camera
brand in the vender model column. Then input the IP address of the camera.
5. Click ‘ Add ’ . The system tries to connect the IP camera remotely. If the connection
is successful, and the camera information (including an image preview) will be
shown in the list below.
6. Click ‘ Import Camera ’ to add the channel. (Click ‘ Back ’ to return the ‘ Add
Camera Device ’ dialog, or click ‘ Cancel ’ to exit.)
NOTE: When the target camera disconnects to the
network or the network loading is too heavy, the
system will raise a dialog whether the user will apply
the camera default value of the system instead of the
setting value of the camera.
7.
When the camera is connected, an ‘ Imported completed! ’ message is raised. Click
‘ OK ’ to close the message.