GVD M3 series, User Manual

Page: 136 / 197

Chapter 5 Alarm & Event Mode
5-10 HD NVR User Manual
5-2-1 Search An Event
No event will be shown in the event list until the event searching function has been
run. The event mode provides two searching conditions: Search by Time and Search
by Category.
5-2-1-1 Search by Time
The event mode allows the user to search the events by the triggered time. See the
following steps:
Figure 5-8 Event Search By Time
1. Click the Event Mode icon.
2. Click the drop-down box and select the HD NVR name in the ‘ Search by HD
NVR ’ field.
3. Check the checkbox of the ‘ Search by Time ’ option.
4.
In the ‘ From: ’ column, select the starting date and time.
5.
In the ‘ To: ’ column, select the ending date and time.
6. Click the ‘ Search ’ button.
7.
The ‘ Events ’ table shows the searching result.
TIP: To reset the event search, click the ‘ Reset ’
button.