74
In
tr
oduc
tion
Pr
oduc
t Description
Instruc
tions f
or use
Technica
l Inf
ormation
Insta
llation
Main
tenance
Spar
e P
ar
ts
Appendix
Con
ten
ts
Declar
ation
Oper
ation & Main
tenance Manual SpeedStile B
P DS
PCW test
Path:
Main menu / Maintenance / Traffic lights test
The display will show:
C U R R E N T : R E D
R E D G R N B A D G E
SW1
SW2
SW3
RESET
• When button
SW1
is pressed, the PCW's will show their
respective
red crosses.
• By pushing button
SW2
the
green arrows
will illuminate.
On the top line of the display, the current command is displayed.
Real time photocells test
Path:
Main menu / Maintenance / Real time Photocells
The state of each sensor is indicated as follows;
0
when free,
*
when engaged.
A buzzer shot will signal any status change.
Striped photocell test
Path:
Main menu / Maintenance / Striped Photocells
This test is very similar to the ‘real time photocell’ test. The only difference is that the logic
memorises the engaged sensors. It display’s which sensors have been engaged or broken when a
walk through test is performed on the lane. On this function, the buzzer is not used.
Relays test
Path:
Main menu / Maintenance / Relay test
With this test, all the relay outputs mounted on the MB01 and GC01 board are tested.
The display will show:
R E L A Y : O F F
O N
O F F
SW1
SW2
SW3
RESET
In the upper row, the state of the relay coil’s are displayed. By pressing buttons
SW1 & SW3
, the
status of the relay’s can be changed. A buzzer shot will signal any status change.
