55
Appendix
Declar
ation
Spar
e P
ar
ts
Main
tenance
Insta
llation
Technica
l Inf
ormation
Instruc
tions f
or use
pr
oduc
t Description
In
tr
oduc
tion
Con
ten
ts
Oper
ation & Main
tenance Manual SpeedStile B
P DS
Flags
Meaning
Fraud_Intr_B:
Signals when the logic detects an Intrusion in
the direction B
Fraud_WW_A:
Signals when the logic detects a Wrong way
and the correct passage is in direction A
Fraud_WW_B :
Signals when the logic detects a Wrong way
and the correct passage is in direction B
Timeout_A:
Signals that a passage timeout expires and the
stack A is decremented
Timeout_B:
Signals that a passage timeout expires and the
stack B is decremented
CTRL_A:
Signals that passage in A is in CONTROL MODE
CTRL_B:
Signals that passage in B is in CONTROL MODE
FREE_A:
Signals that passage in A is in FREE MODE
FREE_B:
Signals that passage in B is in FREE MODE.
LOCK_A:
Signals that passage in A is in BLOCKED MODE
LOCK_B
Signals that passage in B is in BLOCKED MODE
Relays Programming
The user can program any single relay so that it can be activated when a logical mask on the
system flags state becomes true.
The logical mask is composed in a series of instances in AND or in OR; any instance is the state
of a desired flag or its negated status.
For example it is possible to build a mask for a given relay in this way.
Relays K1 is true when:
•
(Reader A enable) AND (Reader B enable) AND (Door closed) AND Not(Fraud_
Tail_A)
The same flags sub set could be combined in this way:
•
(Reader A enable) OR (Reader B enable) OR (Door closed) OR Not(Fraud_Tail_A)
The user can program a different mask one for each relay so that any relay could be activated
with the particular logical combination of flags states. A typical program is an easy mask for any
relays which associates it to a given flag state.
To program a relay mask the user will have to access a proper sub dialogue menu.
This table shows the proper sub dialogue menu for any relay of the system
Relay
Motor Board / Master Side
K1
K1 Main-menu/Setup/IO/Master Board/Conn:M8 Pin:5,6 Relay: K1
K2
K2 Main-menu/Setup/IO/Master Board/Conn:M8 Pin:7,8 Relay: K2
K3
K3 Main-menu/Setup/IO/Master Board/Conn:M8 Pin:3,4 Relay: K3
K4
K4 Main-menu/Setup/IO/Master Board/Conn:M8 Pin:1,2 Relay: K4
