G503237E REV.3 23
1. Press on the touch device and wait for the Android keyboard to appear.
2. Browse down the file to locate the label [videofeeds]
3. Use the touch device to select the text
“name=”
and enter the desired text, then press return in the
keyboard (this will be the name shown in the camera list for this video)
4. Use the touch device to select the text “Address=” and enter the URL value for the RTSP video link +
press return in the keyboard
5. Repeat step 3 and 4 to add as many video links as necessary.
When all the steps are completed, press the Save Configuration File option and finish the configuration
process.
2.3.2.6
Linphone Settings Configuration
Finally, it will be necessary to configure the linphone settings using the Installer Menu icon for “Linphone
Configuration”, in order to access the next menus.
IMPORTANT: The audio Linphone settings (echo cancellation, echo cancellation calibration, adaptative rate
control, and códec bitrate limit) are pre-configured. This parameters must not been modified. If the echo
cancellation or the echo cancellation calibration are modified, the GUINAZ application data has to be
deleted (see Adroid manual) and the reconfiguration of the Linphone parameters is required. The
“Configuration editor” parameters will remain unchanged, However, the “General settings”, “Autoanswer”
and “Emergency configuration” must be reconfigured.
IMPORTANT: linphone settings related to audio/video codec, TCP/IP protocol, audio/video ports and SIP
server settings are configured by default. The installer of each specific installation is responsible for
modifying them according to the existing network infrastructure.
Configuration file
Video links section
