22 G503237E REV.3
2.3.2.4
Setting the Smartive Monitors in P2P MODE
The GUINAZ Smartive monitor includes a menu within the installer settings to set up the street panels for
the existing exterior accesses in the installation, so they can be used with the monitor. Follow the procedure
below in the P2P mode.
1. In the Settings->Installer menu press the icon on screen to edit the configuration file
2. Select the text in section [intercom_contacts] and configure the following parameters for EACH exterior
access present in the installation:
3. Select the value “name=” and introduce the chosen name for the exterior access (i.e., "Main Entrance").
4. Select the value “address=” and enter the following text string (as seen in the top image)
“sip:”+”192.168.X.X”+ “: YYYY”+ return key.
a.
192.168.X.X (Street panel IP address in the LAN network)
b.
YYYY (port value used for the communication, default 5060)
5. Repeat the steps 3 to 4 for each Smartive monitor in the installation.
2.3.2.5
Setting the RTSP Video Links
To set up the video cameras whose streaming can be played on the screen, it will be necessary to
configure each link address using the configuration file. According to the images shown below.
Edit configuration file –
Intercom section
