28 G503237E REV.3
2.3.3.3
Setting the Street Panels in IPBX MODE
The GUINAZ Smartive monitor includes a menu within the installer settings to set up the street panels for
the existing exterior accesses in the installation, so they can be used with the monitor. Follow the procedure
below in the IPBX mode.
1. In the Settings->Installer menu press the icon on screen to edit the configuration file
2. Select the text in section [door stations] and configure the following parameters for EACH exterior access
present in the installation:
3. Select the value “name=” and introduce the chosen name for the exterior access (i.e., "Main Entrance").
4. Select the value “address=” and enter the following text string (as seen in the top image) “sip:”+”SIP
a “:YYYY”+ return key.
a.
SIP account - name of the SIP provider account used in the system
b.
YYYY (port value used for the communication, default 5060)
5. Select the value “config address=” and enter the same value as the IP address used in the previous field
(192.168.X.X)
6. Repeat the steps 3 to 5 for each exterior access in the installation.
Once the configuration is finished, save the changes by pressing the “Save Configuration File” option in the
Installer Menu
To set up remotely the exterior accesses present in the installation using the Smartive monitor, the process
is identical to the one described for the P2P mode in section 2.3.2.4 of this manual
2.3.3.4 Smartive
Monitor Configuration
The GUINAZ Smartive monitor includes a menu within the installer settings to set up the data for connecting
to other monitors present in the system, so they can be used with the monitor. Follow the procedure below
in the IPBX mode.
Configuration file – door_stations section
