G503237E REV.3 9
In case of a missed call, the user has the option to return the call by pressing the relevant icon; in this case,
a SIP communication will be established as
described in section 1.4.2 and 1.4.3
The user may clear the entire saved call log by pressing on the option Clear Log. From then on, the events
cleared will no longer be accessible in the system.
1.4.6 Answering
Machine
Menu
After selecting the "Settings ->Answering Machine" menu in the main menu, the screen will display its
contents as shown below.
The user must select the relevant back icon present in the menu to return to the main menu
To enable the answering machine, the user must use the corresponding icon, being able to disable it again
by changing its position.
The configurable time out tells the monitor how long to wait for the user to answer a call by selecting the
Open Audio option for an incoming call see sections 1.4.2 and 1.4.3, after this period the call will close
automatically and will appear in the call log as a missed call see section 1.4.5. User can choose between
predetermined values of 5, 10, 15, 30, 45 seconds and 1 minute
If the answering machine is enabled as described, the user can then select between the following options in
order to configure the desired behavior of the monitor in case of not attended call
Call deviation:
The field selected should be “ redirect call” that is located in the webserver of the door station
application in the Contacts tab in the lower part of the contacts under the field “Destination Address”
with the following configuration options:
a.
If a valid address is entered in the “Destination Address” field then all lost calls to the
contacts in the door station will be directed to this address independently of the contact
selected for the call.
b.
If there is no address entered in the “Destination Address” field the deviation will be carried
out in the following way:
Lost call options menu
Incoming call Timeout
