16 G503237E REV.3
If the authentication is correct, the existing device installation options will be shown in the following screen
The configuration file can be modified directly on the screen by pressing on it and editing its contents with
the Android keypad interface, as shown in the image below.
Once finished, the changes will be saved by pressing on the "Save Configuration File" icon.
When the user selects the "Setting linphone" icon, it is possible to modify the SIP protocol and Linphone
parameters, the monitor user account and the audio/video and signalling port settings required to establish
the communication through the Linphone Settings menu.
The button “Linphone Conf. Back up” generates a back-up of the Linphone parameters. The last step of the
installation process is to generate a Linphone configuration back-up. In this way, the installation settings
may be recovered if it is required.
Sections 2.3.2.2 and 2.4.2.2 explain step by step the options to be configured in this menu for the relevant
P2P and IPBX operating modes.
Similarly, the monitor network settings can be configured by pressing on the "Network Settings" icon on the
monitor, which includes the contents shown in the image below. The correct configuration for the P2P and
IPBX modes are detailed in sections 2.3.2.1 and 2.4.2.1 of this document.
Finally, the "Portier configuration" option allows the installer selecting from the present devices list in the
configuration file. When pressing the monitor, it will connect remotely to the IP address configured in the
entry system and, after the corresponding authentication, it will be possible to access the web server of the
street panel.
The process that must be followed in order to set up the street panels (remotely) using the Smartive monitor
during the implementation of the installation
is detailed in sections 2.3.2.4 and 2.3.2.5 for the P2P and IPBX
modes
Change SIP settings
Configure entry doors
Configure Android settings
Edit Configuration file
Generate Linphone
configuration back-up
