G503237E REV.3 25
To set up correctly the Smartive 7" interior monitor in the IPBX mode, the installer must follow ALL the steps
detailed in sections 2.3.2.1 to 2.3.2.7 in the ORDER INDICATED.
2.3.3.1 Mode
Selection and Initial Settings
Enter the Setting->Installer menu as seen in section 2.3.3
The installer must follow the next steps to set up the GUINAZ Smartive monitor in IPBX mode.
1. Press on the touch device and wait for the Android keyboard to appear.
2. Using the touch device, select the text
“mode=”
and enter
mode=1
.
3. Using the touch device, select the text
“port=”
and enter the
desired SIP protocol port
value (we
recommend using the
default 5060 port
)
4. Using the touch device, select the text “dtmf_open=” and enter the desired value, which will be the
same as that configured in the street panel
(1)
the
default value is =1
5. Using the touch device, select the text “dtmf_permanent_open=” and enter the desired value, which
will be the same as that configured in the street panel
(1)
the
default value is =0
6. Using the touch device, select the text “dtmf_close=” and enter the desired value, which will be the
same as that configured in the street panel
(1)
the
default value is =2
7. Configure the “Volume selection” to their default values:
- intercom_attenuation= 2
- intercom_mic_gain= -4.0
- door_mic_gain = -6.0
Operating mode
selection
SIP Port
selection
Door Opening
code selection
Permanent
Opening code
selection
Door Closing
code selection
Volume Selection
