GSi Autoflow 2000 Series, Instruction Manual

Page: 46 / 55

2000 Autoflow
46
ELECTRICAL POWER SUPPLY
Autoflow to Fill System Control Box Interconnect
The Fill System Control Box houses the starter
(s) for the fill system(s) that load grain into the Top
Dry Autoflow Unit and for the aeration fan. DO
NOT run the control wires for the Fill System
Control Box in the same conduit used for the power
wires for the fill system and aeration fan motors.
To wire the Fill System Control to the Autoflow
Control Box do the following. 1) Run eleven (11) control wires from the
Autoflow Control Box to the Fill System
Control Box.
2) Connect the wires as shown in figure 24.
Figure 24