GSi Autoflow 2000 Series, Instruction Manual

Page: 11 / 55

2000 Autoflow
11
1) The Fill System
control Box should be
mounted at eye-level.
Make sure to install
the Fill System
Control Box so that
the Fill System(s) and
Aeration fan are in
view.
2) Keep in mind that
wire will be used to
interconnect the Fill
System Control Box
with the Autoflow
Control Box; and,
that power wires will
have to be run from
the entrance panel to
the Fill System
control Box to power
the Fill System and
Aeration fan motors,
which will also run
from the Fill System
Control Box.
3) Use the pattern in
Figure 2 to drill
holes for the Fill
System Control Box.
Fill System Control Box Mounting
CONTROL BOX MOUNTING
Fill System Control Box Mounted to Bin