Reverse osmosis system
GENO-OSMO-X
Order no.
134 750 927-inter Edited by: phar/mrie G:\BA-750927-inter_134_GENO-OSMO_X.docx
51
Parameters
Factory
setting
Setting
range
Comment
Function
Programmable input
Signal
Signal/
error/
forced stop
Forced stop
with
delay of mem-
brane degas-
sing
Input function terminals 60/61:
Signal
= signal contact termi-
nals 8/9 switches and a pro-
grammable text appears, the
system continues running
Error
= signal contact termi-
nals 7/9 switches and a pro-
grammable text appears, the
system switches off
Forced stop
= system
switches off without prior
warning or error and does not
flush. If the input signal is re-
moved again, the system
starts running again.
Forced stop with signal and
delay
= interrupts forced op-
eration (overfill protection)
and opens MV V4.
Membrane degassing
= sys-
tem switches off and text dis-
played for prog. input is indi-
cated.
Function
Release input
0
0/1/2
Bus signal
Input terminals 52/53 reacts to
NOC:
0
= no function stored
1
= function „Smart Metering“
for systems with large perme-
ate tank and measurement of
filling level with 4-20 mA sig-
nal: In case of „favourable
electricity tariffs“, the in-
put/output level is
increased, so that preferably
permeate for stocks can be
produced.
2
= „standard“ start / stop
command (analogue button
Info level) via release input.
Bus signal = „standard“ start /
stop com-mand (analogue
button Info level) via release
from bus system on site (Mas-
ter).
Text displayed for
prog. input
20
alphanumeric
digits
If the programmed input is
programmed to Signal or Er-
ror, the text will be displayed if
a signal occurs at terminals
60/61
Summary of Contents for GENO-OSMO-X
Page 2: ......
