Reverse osmosis system
GENO-OSMO-X
Order no. 134 750 927-inter Edited by: phar/mrie G:\BA-750927-inter_134_GENO-OSMO_X.docx
36
F Operation
1 | Introduction
Note:
Instructions in bold are absolutely essential to ensure that
work can continue. All other instructions can be ignored if the
value shown on the display remains unchanged.
Settings in the technical service programming level may only be
performed by Grünbeck's technical customer service/authorised
service company or by persons expressly authorised by Grünbeck.
Warning!
Incorrect settings may lead to hazardous operating
conditions which cause injury, illness or damage to property.
The operation manual must be strictly adhered to! Only make
the settings described in there!
2 | Screen layout of the GENO-tronic operating element
2.1 Home screen
The home screen is the superordinate screen for all subsystems
connected to/interconnected with the control unit of the GENO-
OSMO-X: Here, it is set out from left to right how the water flows
through the individual treatment steps. On the far left, the system
range (cogwheels) for fundamental settings is located.
Lightly tapping on a subsystem provokes a switch-over to the
Info level of the respective subsystem.
Status line, colour signals the
system status
System range
Subsystem range
Summary of Contents for GENO-OSMO-X
Page 2: ......
