Grunbeck GENO-OSMO-X, Operation Manual

Page: 20 / 76

Reverse osmosis system
GENO-OSMO-X
Order no. 134 750 927-inter Edited by: phar/mrie G:\BA-750927-inter_134_GENO-OSMO_X.docx
18
6 | Scope of supply
6.1 Standard equipment

Control unit with 4.3" graphics touch panel to indicate the op-
erating state and system values. Voltage-free contacts to re-
lay advance warnings and safety shut-downs. Digital input for
priority permeate production in times when electricity tariffs
are low (smart metering). Fully automatic monitoring and con-
trol of the system parameters permeate flow, monitoring of
the permeate conductivity by means of limit value default set-
tings in the control unit, recovery, concentrate recirculation
and pump frequency (subject to the water temperature). Re-
cording of measured data on integrated SD card. Possibility
to interconnect systems installed upstream or downstream
(water softener, dosing system, permeate tank, pressure
booster) and to operate them by remote control.

Power distribution with mains switch and automatic circuit
breakers as feeding point for power supply provided by oth-
ers on site.

High-pressure centrifugal pump made of stainless steel
1.4401 to supply the reverse osmosis membrane(s).

Ultra-low pressure reverse osmosis membrane(s), installed in
pressure pipe made of high-strength PE.

Three-part hydro module made of red bronze, chemically
nickel-plated, featuring pressure gauges, adjusting resp. so-
lenoid valves and sampling valves. Flow sensors integrated
in the hydro module, volume measurement of the system
flows permeate, concentrate and concentrate recirculation.
The permeate hydro module features a conductivity measur-
ing cell (temperature-compensated).

Pipework between pump and reverse osmosis membrane
made of high-pressure resistant PE pipes and PP compres-
sion fittings.

High-quality system rack made of anodised aluminium to
house all system components.

A ventilation device to be mounted onto the concentrate pipe
provided by others on site.

Fine filter incl. pressure reducer, completely preassembled in
system inlet.

Installation and operation manual.