2 - 6
• Training includes actual operation.
• Clearly understand instructions.
• Be alert! Conditions can change.
NEVER operate unit after or during the use of
medication, drugs or alcohol. Safe operation requires
your complete and unimpaired attention at all times.
NEVER allow anyone to operate the unit when their
alertness or coordination is impaired.
DO NOT operate unit without wearing adequate outer
garments. Wear adequate safety gear and protective
gloves. Wear proper footwear to improve footing on
slippery surfaces.
Protect eyes, face, and head from objects that may be
thrown from unit. Wear appropriate hearing protection.
Avoid Sharp Edges. Sharp edges can cut. Moving
parts can cut or amputate fingers or a hand. Wear
gloves to service unit when handling sharp edges.
ALWAYS keep hands away from any pinch points.
ALWAYS keep hands and feet away from all moving
parts during operation. Moving parts can cut off body
parts.
DO NOT touch unit parts which might be hot from
operation. Allow parts to cool before attempting to
maintain, adjust, or service.
Keep the operator platform free of dirt, grease, or mud.
NEVER place feet under the platform.
Do not tie yourself to the unit.
Controls
Come to a complete stop before reversing.
Never jerk the control levers. Always use a steady even
action to achieve smooth control.
When using attachments, ensure that they are
attached correctly with latch pins engaged and practice
the operation before beginning work.
Always be aware of obstructions that may cause injury
to operator or damage to the unit.
Avoid loss of control or tipping. Do not carry a load with
the lift arms raised. Always carry load close to ground.
Do not step off the platform when lift arms are raised.
Always ensure there is ample overhead clearance.
Keep alert with eyes fixed in direction of travel.
Do not travel with the arms in the raised position.
Maintenance
ALWAYS maintain unit in safe operating condition.
Damaged or worn out muffler can cause fire or
explosion.
Check the conditions of the unit at the end of each day
and repair any damage or defects.
ALWAYS block wheels and know all jack stands are
strong and secure and will hold weight of unit during
maintenance.
When performing service which requires arms to be
raised, make sure cylinder lock is in position and
secure.
Keep nuts and bolts tight and keep equipment in safe
operating conditions.
Before maintenance, adjustments, or service (except
where specifically recommended), shut off engine.
Allow hot parts to cool.
Keep unit free of dirt, stones, and other debris. Clean
up oil or fuel spills.
Storage
DO NOT store unit inside a building with fuel in the fuel
tank where any ignition sources are present. Allow unit
to cool completely.
ALWAYS clean unit before extended storage. See
Engine Manual for proper storage.
Battery
Avoid Electric Shock. DO NOT reverse battery
connections.
Explosive Gases! Poisonous battery fluid contains
sulfuric acid and its contact with skin, eyes, or clothing
can cause severe burns.
No flames. No sparks. No smoking near battery.
Always wear safety glasses and protective gear near
battery.
DO NOT TIP battery beyond a 45
o
angle in any
direction.
ALWAYS KEEP BATTERIES OUT OF REACH of
children.
Transport
Use extra care when loading or unloading unit onto
trailer or truck. Secure unit chassis to transport vehicle.
Always use the tie down lugs provided on each side of
the unit to secure the unit when transporting by truck or
trailer.
NEVER secure from rods or linkages that could be
damaged.
Always use the lifting lug at the top of the unit when
lifting the unit with an appropriate crane on a
construction site.
DO NOT transport with attachment in raised position.
Lower attachment when unit is parked or stored unless
a positive mechanical lock is used.
Attachments and Accessories
Use only attachments or accessories designed for your
unit.
Summary of Contents for 950001
