GRASS VALLEY Turbo, User Manual

Page: 2 / 300

2
Turbo iDDR User Guide 06 July 2005
Copyright
Copyright © 2005 Thomson Broadcast and Media Solutions, Inc. All rights reserved. Printed in
the United States of America.
This document may not be copied in whole or in part, or otherwise reproduced except as
specifically permitted under U.S. copyright law, without the prior written consent of Thomson
Broadcast and Media Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900
Trademarks
Grass Valley, M-Series, Profile, Profile XP, and Turbo are either registered trademarks or
trademarks of Thomson Broadcast and Media Solutions, Inc. in the United States and/or other
countries. Other trademarks used in this document are either registered trademarks or
trademarks of the manufacturers or vendors of the associated products. Thomson Broadcast
and Media Solutions, Inc. products are covered by U.S. and foreign patents, issued and
pending. Additional information regarding Thomson Broadcast and Media Solutions, Inc.
trademarks and other proprietary rights may be found at www.thomsongrassvalley.com.
Disclaimer
Product options and specifications subject to change without notice. The information in this
manual is furnished for informational use only, is subject to change without notice, and should
not be construed as a commitment by Thomson Broadcast and Media Solutions, Inc. Thomson
Broadcast and Media Solutions, Inc. assumes no responsibility or liability for any errors or
inaccuracies that may appear in this publication.
U.S. Government
Restricted Rights
Legend
Use, duplication, or disclosure by the United States Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.277-7013 or in subparagraph c(1) and (2) of the Commercial Computer
Software Restricted Rights clause at FAR 52.227-19, as applicable. Manufacturer is Thomson
Broadcast and Media Solutions, Inc., P.O. Box 59900, Nevada City, California 95959-7900
U.S.A.
This Product
Incorporates Licensed
Software
Use of the software installed on the this product or on the associated media is subject to the
terms of end user license agreements. You should not use the software until you have read the
end user license agreements. By using the software, you signify that you have read the end
user license agreements accessible through the Help | About dialog box and accept their terms.
Revision Status
Rev Date Description
May 9, 2005 Initial Release for Software Version 2.1 — 071-8401-00
July 6, 2005 Update software version number for 2.2 — 071-8401-01