GRASS VALLEY Turbo, User Manual

Page: 96 / 300

96
Turbo iDDR User Guide 06 July 2005
Chapter 3 Operation: Front Panel Control
Adding GPI output triggers to playlists
You can assign GPI output triggers to events in a playlist. The GPI outputs can be used
to trigger external equipment when the list plays. Before you can use GPI output
triggers in a list, you must assign GPI outputs to the play channel using the Tools
menu. See
“Setting GPI output triggers” on page 45 .
NOTE: If you want to play a list that was created on another play channel, you must
ensure that GPI triggers for the play channels use the same names, otherwise the GPI
triggers will not occur. Using identical GPI naming also allows copying and pasting
events between lists.
Adding GPI output triggers
1. Rotate the control knob to select an event in the playlist, then press
MENU
, and
choose
Add Effect
.
2. Use the control knob to highlight a GPI Output in the Add Effect menu, then push
in the knob to select.
NOTE: If no GPI outputs are listed, use the configuration Tool to assign GPI outputs
to the current channel, then return to this step.
“Setting GPI output triggers” on
page 45 .
3. Use the control knob to highlight a GPI Position, then push in the knob to select.
The GPI trigger symbol is displayed on the event thumbnail.
Removing GPI output triggers
• Rotate the control knob to select an event in the playlist, then press
MENU
, and
choose
Remove Effect
.
Action Trigger point
Start of event First frame of event
End of event Last frame of event