GRASS VALLEY TRINIX NXT -, Installation Manual

Page: 421 / 449

Trinix NXT — Installation and Service Manual 421
Trinix Fiber Boards Installation
DIP Switch Settings
Figure 285.
Switch settings are shown in Table 107 .
Table 107. Reclock settings for HD output boards.
Installing the Trinix Fiber Option
You will need to remove the standard BNC rear panel and coax Input or
Output boards, if they are present. Follow these steps to install the Trinix
fiber option:
1. Remove the coaxial Input or Output boards from the front of the
routing switcher. Move to the rear of the router.
S705-8
“AUTO RCLK”
Switch on S701
through S704
Reclock all outputs if possible. Bypass unlocked outputs.
(Default setting)
Closed All closed
Bypass all outputs Open All open
Reclock selected outputs if possible, otherwise turn OFF.
Bypass all other outputs
Open
Closed for selected out-
puts. All others open
SYNC SEL A
SYNC SEL B
AUTO RCLK
Open Closed
BYPASS 0
BYPASS 1
BYPASS 2
BYPASS 3
BYPASS 4
BYPASS 5
BYPASS 6
BYPASS 7
BYPASS 8
BYPASS 9
BYPASS 10
BYPASS 11
BYPASS 12
BYPASS 13
BYPASS 14
BYPASS 15
BYPASS 16
BYPASS 17
BYPASS 18
BYPASS 19
BYPASS 20
BYPASS 21
BYPASS 22
BYPASS 23
BYPASS 24
BYPASS 25
BYPASS 26
BYPASS 27
BYPASS 28
BYPASS 29
BYPASS 30
BYPASS 31
S705
S701
S702
S703
S704