GRASS VALLEY TRINIX NXT -, Installation Manual

Page: 296 / 449

296 Trinix NXT — Installation and Service Manual
Section 13 — Broadlinx Software
The secondary board will automatically be given the same IP address
as the primary board, plus 1.
Subnet Mask : This field assigns the Subnet mask that is usually
255.255.255.0 (Class C net with no sub-netting).
Target Name
(SMS control only): This field assigns the name used by
SMS 7000 control system for router. This name can be up to eight char-
acters, but the last character must be a “1.” (The Secondary NR will
automatically be given the same name with “2” as the last character.)
Primary Controller IP (Encore control only): This field assigns the
address of the Master System Controller Board.
Secondary Controller IP (Encore redundant control only): This field
assigns the address of the Mirror System Controller Board.
Gateway IP : This field assigns the Gateway IP address. This field is
only used if the Trinix Routing switcher is connected to the Broadlinx
PC through a gateway.
Time Server IP This is an optional network time server address.
SNMP
When the SNMP feature is licensed you will be able to enter SNMP IP mon-
itoring addresses by clicking the Configure SNMP Manager IP Addresses
hyperlink. You may enter up to five monitoring addresses and names.
Follow these steps to enter the SNMP license:
1. Open the Configuration screen.
Figure 209. The Enter License Key “Arrow”
2. Click the
Enter License Key
arrow button. The Enter SNMP License
window will then appear.
Figure 210. The Enter License Key
3. Enter the SNMP license key that was issued to you by sales and
support.
Click the Enter License
Key arrow