GRASS VALLEY TRINIX NXT -, Installation Manual

Page: 386 / 449

386 Trinix NXT — Installation and Service Manual
Section 18 — Analog Input Processing
5, 0 N/A
6, 0 N/A
7, 0 N/A
8, 0 N/A
9, 0 N/A
a, 0 N/A
b, 0 N/A
c, 0 N/A
d, 0 N/A
e, 0 N/A
f, 0 N/A
Press: '0 ~ 9' or 'A ~ F' to select channel to edit.
Press: 'M' to move/copy channel configuration.
Press: 'Z' to set ALL channels to factory defaults.
Press 'ESC' to return to Main Menu.
When an input (channel) is selected, the display will show the values for
that particular channel (NTSC shown):
Figure 276. Picture enhancer menu for one channel.
Picture Enhancer -
--------------------------------------------------------------------------------
Reference - Input 0: Line Rate: 525 Line Type: NTSC (M, J)
================================================================================
Detail Enhancer Level:
Disabled 0
Low 1
Medium 2
High 3
--------------------------------------------------------------------------------
+---------------------------- Channel Line Rate ----------+
| |
| +-------------------- Detail Enhancer |
+-------+--------------------------------------------------------------------+--
0, 0 525
To Set Picture Enhancer Mode press: 'Q'.
Press: 'ESC' to ABORT changes and return to the previous Menu.
Press: 'Enter' to ACCEPT changes and select a different channel.
Press: 'Y' to revert back to last settings.
Press: 'Z' to set THIS channel to factory defaults.
6.) Display Channel status
These menus are shown below.
Figure 277.
======= Channel(s) Status Menu Options =======
1.) Display status of channels: 0 thru 3.
2.) Display status of channels: 4 thru 7.
3.) Display status of channels: 8 thru 11.
4.) Display status of channels: 12 thru 15.
5.) Display status of All channels: 0 thru 15.
Note:
For option '5', The terminal application must be setup
to display a width of at least 160 characters. Otherwise
the data may be unreadable!
Press 'ESC' to return to Main Menu.
Select a menu option:
When a group of inputs (channels) is selected, the display will show the
values for those channels:
Figure 278. Channel Status display for four channels.
Channels: 0 1 2 3
----------------------------------------------------------------------------
Video Composite In:
Monochrome Input (On/Off) : 0 0 0 0