![background image](http://html1.mh-extra.com/html/graco/horizon-fluid-management-systems/horizon-fluid-management-systems_instructions-manual_2251039049.webp)
308607
49
Run Mode -- New Job
Follow this procedure to start a fluid dispense job.
Instructions
Screens
1. Select New Job
With the cursor at NEW JOB on the RUN screen,
press ENTER on the keypad.
2. Enter Vehicle Data
The job number, vehicle ID, and the custom input field
are optional. What is necessary to enter is determined
during setup. You may see some, all, or none of the
following prompts for entries.
a.. RUN NEW JOB screen appears.
b.. Cursor is in the JOB NUMBER field.
c.. Type the job number.
d.. Press ENTER on the keypad.
e.. Cursor moves to the VEHICLE ID field.
f.. Type the vehicle ID number.
g.. Press ENTER on the keypad.
h.. Cursor moves to the custom input field. In this
example, MILES has been entered during set-
up to record the odometer reading of the ve-
hicle being serviced.
i.. Type the necessary information in the custom
input field; up to 7 letters or numbers allowed.
a. Press ENTER on the keypad.
RUN NEW JOB Screens
_ _ _ _ _ _ _ _ _ _
"
RUN
A
_ _ _ _ _ _ _ _ _ _
NEW JOB
VIEW CURRENT JOBS
REPORT JOBS
_ _ _ _ _ _ _ _
"
RUN NEW JOB
A
_ _ _ _ _ _ _
JOB NUMBER: _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
"
RUN NEW JOB
A
_ _ _ _ _ _ _
JOB NUMBER:
XXXXXXX
VEHICLE ID:
_ _ _ _ _ _ _
_ _ _ _ _ _ _ _
"
RUN NEW JOB
A
_ _ _ _ _ _ _
JOB NUMBER:
XXXXXXX
VEHICLE ID:
XXXXXXX
MILES:
_ _ _ _ _ _ _
Summary of Contents for Horizon Fluid Management Systems
Page 81: ...308607 81 Appendix...
Page 97: ...308607 97 Blank Forms...