Graco Horizon Fluid Management Systems, Instructions Manual

Page: 91 / 108

308607 91
Horizon Form #3
Use Form #3 as a guide for inputting the names of the
dispense areas.
You also define which fluids are available at each
dispense area while in the DISPENSE AREA screens.
See Form #4 (next page) for that information.
Define Dispense Areas
1. The cursor will be in the dispense area number
(DA01) field. The dispense area number will auto-
matically increment up by 1 as you add areas or
you can type the number manually.
2. Press ENTER on the keypad to move the cursor to
the NAME field.
3. Type the name of the dispense area. The name
can be up to 10 characters and should describe
the location where fluids will be dispensed.
4. Press ENTER to input the name and move the
cursor to the next field.
NOTE: The fluid numbers (in this example: 1, 2, and 3)
will be displayed according to the number of fluids that
were entered while in the FLUID DATA screens.
5. Leave the N if fluid 1 is not available at this dis-
pense area. Scroll to Y by pressing the
#
or
"
key if
the fluid is available at this dispense area.
6. Press ENTER on the keypad to ENTER the value
and move to the next N.
7. After pressing ENTER for the last fluid, the cursor
will moves to ADD on the bottom line.
8. If there are more dispense areas to add, press
ENTER.
9. When all the dispense areas have been entered,
use the
#
or
"
keys to move the cursor to EXIT and
press ENTER.
NOTE: Use the
#
or
"
keys to move the cursor to
DELETE if you need to delete dispense area entrees.
10. After EXIT is entered, the SAVE SETUP verifica-
tion screen will appear.
11. Scroll to YES by pressing the
#
or
"
key.
12. Press ENTER on the keypad to save the setup
options and go to the ASSIGN CONNECTIONS
screen.
DISPENSE AREA Screen
DAO1 NAME: _ _ _ _ _ _ _ _ _ _
1 2 3
N N N
ADD EXIT DELETE
DAO1 NAME: BAY 1 _ _ _ _ _
1 2 3
Y Y Y N N Y
ADD EXIT DELETE
SAVE SETUP Verification Screen
SAVE SETUP:
"
YES
" #
WARNING:
SAVE WILL CANCEL
ACTIVE/WAITING JOBS