![background image](http://html1.mh-extra.com/html/graco/horizon-fluid-management-systems/horizon-fluid-management-systems_instructions-manual_2251039053.webp)
308607
53
Run Mode -- New Job
Instructions
Screens
7. Dispense (continued)
d.. Dispense the fluid.
If the dispense was “preset”,
the job will end
by either reaching the preset amount or by tim-
ing out (see page 39) because the job was
interrupted or was never initiated.
If using “free flow” dispense,
the fluid will
dispense whenever the operator activates the
dispense device. The job will end when the
preset time out period is reached (see
page 39).
e.. After the job ends, it will be reported on the
printer or computer if the system is configured
for either printer or computer reporting.
f.. The next job in the “waiting” queue will move
up to the “active” queue.
g.. Press the back key on the keypad to get back
to the RUN screen.
a. Enter additional jobs as needed.
RUN Screen
_ _ _ _ _ _ _ _ _ _
"
RUN
A
_ _ _ _ _ _ _ _ _ _
NEW JOB
VIEW CURRENT JOBS
REPORT JOBS
Summary of Contents for Horizon Fluid Management Systems
Page 81: ...308607 81 Appendix...
Page 97: ...308607 97 Blank Forms...