![background image](http://html1.mh-extra.com/html/graco/horizon-fluid-management-systems/horizon-fluid-management-systems_instructions-manual_2251039054.webp)
54
308607
Run Mode -- View Current Jobs
Follow this procedure to check the status of dispense jobs.
Instructions
Screens
1. Select View Current Jobs
a.. At the RUN screen, move the cursor to VIEW
CURRENT JOBS by pressing the
"
or
#
key.
a. Press ENTER on the keypad.
RUN Screen
_ _ _ _ _ _ _ _ _ _
"
RUN
A
_ _ _ _ _ _ _ _ _ _
NEW JOB
VIEW CURRENT JOBS
REPORT JOBS
2. View Current Jobs
a.. The oldest job in the system is displayed.
D
ACTIVE
in line one means that the sole-
noids have been activated and the system
is ready to dispense.
WAITING
in line one means that there is a
utilization conflict, which has placed the job
in the waiting queue. The job will start as
soon as the conflict is eliminated.
NOTE:
When the job is complete, it is removed
from the active queue and will not appear on
the screen.
D
12:01
in line one of the Active Job is the
time the job was entered.
JOE
is the identification of the operator.
D
The second line shows the requested
amount and name of the dispense fluid.
D
The third line shows the dispense location.
D
The fourth line is the STATUS field, which
shows the amount of fluid that has been
dispensed or is being dispensed.
b.. Press the
"
or
#
key to move to the next job.
a. If the active and/or waiting jobs are complete,
the NO JOBS IN QUEUE screen will appear.
Press the BACK key to exit.
VIEW CURRENT JOBS Screens
Active Job
ACTIVE
12:01 JOE
004.0 QT PENNZ5W20
TO BAY3
STATUS:
003.0 QT
# "
Waiting Job
WAITING
12:01 JOE
05.0 LT 5W30
TO BAY1
STATUS:
000.0 LT
# "
NO JOBS IN QUEUE Screens
Active Job
THERE ARE NO JOBS
IN THE ACTIVE QUEUE
USE
#"
FOR MORE
USE BACK KEY TO EXIT
Waiting Job
THERE ARE NO JOBS
IN THE WAITING QUEUE
USE
#"
FOR MORE
USE BACK KEY TO EXIT
Summary of Contents for Horizon Fluid Management Systems
Page 81: ...308607 81 Appendix...
Page 97: ...308607 97 Blank Forms...