308607
43
Computer: Receiving Horizon Data
Windows 3.1
The following instructions are for use with computers
running Windows 3.1.
Terminal Program Setup
Follow these steps to provide the terminal program
with the settings needed to receive Horizon data. Once
these settings are saved, they do not have to be set
and saved again, just load the HORIZON.TRM file
each time the terminal program is started up.
1. Open
Accessories
in your
Program Manager
.
2. Open
Terminal
.
3. Pull down the
Settings
menu and select
Commu-
nications
.
4. Set as shown below (Baud Rate--9600, Data
Bits--8, Stop Bits--1, Parity--None, Flow Control--
None, Connector--COM1), then select
OK
.
5. Pull down the terminal
File
menu and select
Save
As
.
6. Type in the desired
File Name
(example: HORIZON.TRM).
7. Make sure the
Save Files of Type
is set to
Termi-
nal Files (*.TRM)
.
8. Select the desired
Drive
and
Directory
where you
want the Horizon terminal definition to be saved.
9. Select
OK
.
Summary of Contents for Horizon Fluid Management Systems
Page 81: ...308607 81 Appendix...
Page 97: ...308607 97 Blank Forms...
