126
Operating when connected to a PABX
Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / pabx.fm / 08.10.2003
Dial * and #
Once
Dial * and #
has been activated, the
*
and
#
characters are transmitted during
dialling as commands to the exchange or PABX.
Regardless of the setting options above,
after dialling
or during the conversation, the
phone switches automatically to tone dialling (DTMF), e.g. for remote control of an
answering machine.
Activating/deactivating the keypad during a call
In addition to the ongoing settings described above, you can also switch over
temporarily to the keypad.
The setting is only applicable to the current external call and is automatically
deactivated after the call is ended.
Activating the keypad for the next connection
All dialling characters (
0–9, *, #
) will be sent as a string of keypad characters with the
next connection (dial and call). In the connection status, the keypad is retained and is
not automatically switched over to tone dialling (DTMF).
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Settings
Select the menu item and confirm.
~
Enter system PIN if required (page 90).
s
System settings
Select the menu item and confirm.
s
Spec. function
Select the menu item and confirm.
s
Dial properties
Select the menu item and confirm.
s
Standard dial
Select the setting and confirm, e.g.
Standard dial
(
‰
= activated).
OK
OK
OK
OK
OK
OK
OK
i
Open the menu.
either ...
Activate the keypad:
s
Keypad on?
Select the menu item and confirm.
~
Enter the keypad code.
or ...
Deactivate the keypad:
s
Keypad off?
Select the menu item and confirm.
OK
OK
i
Open the menu.
s
Set base
Select the menu item and confirm.
s
Call preparat.
Select the menu item and confirm.
s
Temp. keypad
Select the menu item and confirm (
‰
= activated).
OK
OK
OK