Gigaset CX203 isdn Manual Download

Page: 94 / 168

Security settings

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / security.fm / 08.10.2003

Security settings

Changing the system PIN

You can protect the following settings against unauthorised access using the system PIN

(Personal Identification Number):

◆

Call charge settings (

Costs)

◆

Internal and external call divert
(

Set base/ Ext. call forw.

Int. call forw.

)

◆

SMS service centres, caller configurations, security, ISDN, and system settings (

Set base

Settings

)

◆

Getting started wizard (

Set base

Installation

)

The system PIN will not work with the number 0000.
When supplied, the system PIN is preconfigured to 0000.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Providing you choose a number other than 0000:

Enter PIN and confirm.

Security

Confirm.

Change PIN

Select the menu item and confirm.

Enter new system PIN (up to 8 digits, 0 to 9) and

confirm.

Repeat the new system PIN and confirm.

Hold

down (back to idle status).

Memorise the new system PIN! If you forget it, the device will require

technical intervention. If this happens, contact the Siemens Hotline.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands