Gigaset CX203 isdn Manual Download Page 15

Page: 15 / 168

Preparing the base station for use

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / starting.fm / 08.10.2003

Overwriting characters

When entering

Units/Costs

the number of digits is fixed and there is a default entry in

the field. Using the display keys, position the cursor on the digit that has been entered

incorrectly and overwrite it.

Idle status

Display in idle status (example)

Reverting to idle status from anywhere in the menu:

◆

Press the exit menu key for around 1 second or

◆

do not press any key: The display

automatically

reverts to idle status after 1 minute.

Changes which you have not confirmed or saved by pressing

YES

Store

Send

or with

Store

will be lost.

Menu operation, with "Setting Handsfree Volume" as an example

Operating the base station using a handset

The CX203isdn and CX253isdn bases support the S1, SL1, C1 and C2 handsets. When

used in conjunction with a Gigaset handset, your base offers you a variety of features.

Depending on the handset used, you have access to a particular range of these features.

On page 143 you will find a list of which features can be used with which handsets.
Operating instructions for the S1, SL1, C1 and C2 handsets are enclosed. The current

version of the operating instructions is available on the Internet at

www.my-siemens.com/gigaset.
Below, examples of operating the base station from an S1 or SL1 handset and a C1 or

C2 handset are presented for "Assigning an MSN a ringer melody".

Internal 11

20.09.03

09:45

INT SMS

(Date and time have already

been set)

Gigaset CX203isdn

AM:

Internal 11

20.09.03

09:45

INT SMS

Gigaset CX253isdn

Two lines with situation specific

system information

Press the enter menu key. The menu opens.

Press the display key until

Audio

is marked in the display (by the

frame) and then use the display key

to confirm.

Press the display key until

Vol.Loudspeaker

is marked in the display

(by the frame) and then use the display key

to confirm.

u v

Press the display keys to select the volume (1-5).

Now press the display key to confirm the setting.

Hold

down the exit menu key to return to idle status.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands