Gigaset CX203 isdn Manual Download Page 60

Page: 60 / 168

SMS (text messages)

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / sms.fm / 08.10.2003

The message list is displayed, e.g. follows:

Opening with the message key
Precondition:

There is at least one

new

message in the list.

Opening with the menu

A new text message is displayed, e.g. as follows:

If the SMS memory is full and the SMS centre is unable to transfer any more, an

appropriate message will appear on the screen. Press

to confirm and delete text

messages you no longer need from the incoming and outgoing message list (see also

page 53 and page 56). The SMS centre will then re-transmit the text message.

Reading and deleting text messages in the incoming message list

Precondition:

You have opened the incoming message list (page 55).

Inbox 2/ 5

Number of new text messages in the list
Number of old, read text messages in the list

Press the message key.
If there are no new calls/messages in the other lists,

then the first

new

text message is opened

immediately. Otherwise:

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

SMS

Press the display key.

Inbox 2/ 5

If necessary, select and confirm. The incoming

message list is opened and the first

new

message is

displayed.

Open the menu.

SMS

Confirm.

Inbox 2/ 5

Select the menu item and confirm.

Total number of new SMS

Number of the text

message displayed

New textm.

1/ 2

1234567890
12.07.03

09:45

X W

Text message status:

New, Old, Error

Phone number of the sender

Select SMS.

Open the submenu.

either ...

Read SMS:

Read textmessage

Confirm. Use

to view the continuation of the text

message in the display.

or ...

Delete SMS:

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands