Gigaset CX203 isdn Manual Download Page 127

Page: 127 / 168

123

Operating with other devices

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / devices.fm / 08.10.2003

Registering a repeater

Precondition:

Gigaset Repeater has been deactivated (mains cable unplugged).

1. Prepare the base station for registration:

The base station is ready for registration for as long as

Registration

proced.running

is shown in the display.

2. Plug the Gigaset Repeater into the mains. The LED on the Gigaset repeater flashes.

After a short while the LED is permanently illuminated. This indicates that

registration has been completed and the repeater is ready for use.

Further information is available in the operating instructions for the Gigaset Repeater.

Gigaset M101 Data modules and Gigaset DECT/M105 USB adapter

The Gigaset M101 Data with V24 interface and the Gigaset DECT/M105 USB adapter

with USB interface give you the option of establishing a wireless connection between

the base station and your PC. This makes it possible to use a connected PC to :

◆

Configure your base station

◆

Manage Phonebooks from the PC, the base station or handsets

◆

Fax from the PC (using fax emulation with no hardware requirements)

A connection via a Gigaset M10x Data data module provides you with a 64 kbit/sec

interface.
The internal numbers

PC 41

PC 48

on your base station are provided for this

purpose.
For installation, see the installation instructions on the CD-ROM enclosed with the data

module.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 90).

Setup user

Select the menu item and confirm.

Register device

Select the menu item and confirm.

Check that there are no other base stations that are ready for

registration in the vicinity of the Gigaset Repeater during this

procedure.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands