Gigaset CX203 isdn Manual Download Page 125

Page: 125 / 168

121

Operating with other devices

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / devices.fm / 08.10.2003

Registering a Gigaset 2000 C handset

Registering a Gigaset 2000S / Gigaset 1000 C/S handset

For the registration procedure described below:

You can register a maximum of four other handsets (e.g. Gigaset 2000S, GAP handsets)

or wireless devices (e.g. Gigaset 1000 TAE, STA). Register these devices first.

Registering a Gigaset 2000S handset

The lowest free internal number is assigned. It is not possible to select a free internal

number.

Registering a Gigaset 1000 C/S handset

For the registration procedures, please refer to the corresponding operating

instructions.

Press to turn on the handset.

Open the menu.

Settings

Select the menu item and confirm.

Registration

Select the menu item and confirm.

Station 1

Select base (1-4) and confirm.
Open the submenu.

Registration

Select the menu item and confirm.

Enter the system PIN of the base (factory default:

0000) and confirm.
Press lit Register key on the base (page 117), key

flashes. The base is only ready for registering while

the key is flashing.

Int.11 OK

Select internal number and confirm, e .g.

Int.11

Successful registration is confirmed on the display.

Press

(off)

o h

Simultaneously press the number of the base station

and

(on)

Enter system code.
Press lit Register key on the base (page 117), key

flashes. The base is only ready for registering while

the key is flashing.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands