Gigaset CX203 isdn Manual Download Page 126

Page: 126 / 168

122

Operating with other devices

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / devices.fm / 08.10.2003

De-registering handsets

Gigaset Repeater

You can increase the range of your handsets with the Gigaset Repeater. You can operate

up to six repeaters on your base station. To ensure the repeater is installed correctly,

repeater capability must be activated on the base station.

Activating/deactivating repeater mode

You can use this function to activate and deactivate repeater mode.
By factory default, this repeater capability is deactivated.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 90).

Setup user

Select the menu item and confirm.

De-reg. device

Select the menu item and confirm.

Int.16

Select the handset that you wish to de-register and

confirm, e.g.

Int.16

Hold

down. Return to the idle state.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 90).

System settings

Select the menu item and confirm.

Spec. function

Select the menu item and confirm.

Repeater

Select the menu item and confirm.

[RRRRRRRRRRRRRRRRRRRRRRRRRRR]

NEXT

Press the display key to save the setting. The handset

goes off briefly (

‰

= activated).

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands