Gigaset CX203 isdn Manual Download Page 110

Page: 110 / 168

106

System settings

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / settings_bs.fm / 08.10.2003

Setting up the waiting melody

An external caller hears the set waiting melody when the connection is on hold in the

base station (internal) (page 105). An external party whose connection is on hold in the

telephone exchange (external), and an internal user who is on hold, will not hear a

waiting melody.
The following settings can be selected:

By factory default,

Internal

is activated.

Internal

The party on hold hears the waiting melody of

the base.

Off

When the waiting melody is deactivated, a setting

cannot be made.

Open the menu.

Set base

Select the menu item and confirm.

Settings

Select the menu item and confirm.

Enter system PIN if required (page 90).

System settings

Select the menu item and confirm.

Music on hold

Select the menu item and confirm.

Internal

Select and confirm the desired setting, e.g.

Internal

(

‰

= on).

Hold

down (back to idle status).

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands