Gigaset CX203 isdn Manual Download Page 72

Page: 72 / 168

Operating the answering machine (on CX253isdn)

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / answeringm_use.fm / 08.10.2003

Playing a message to another caller

During an external call you can play messages from the answering machine to the

person you are calling.

Precondition:

The same receive MSN is assigned to the handset and the answering

machine.

During the call:

Playing back memos

Precondition:

You have selected an answering machine (page 62).

Press the display key to open the menu.

Play message

Select the menu item and confirm.

AM1

If necessary, select answering machine and confirm,

e.g.

AM1

If AM lock is set (page 79): enter the answering

machine PIN and confirm.
Information about the oldest message is displayed

on the screen. The message is

not

played back.

Select message and open the submenu.

Playback

Select the menu item and confirm. The playback

starts. The other party can hear the message being

played.

End playback:

Press the display key to open the submenu.

Exit

Select the menu item and confirm. The playback

stops. You can speak to the caller again.

Memos

Select the menu item and confirm.

Play memo

Select the menu item and confirm.

s t

Jump to the next or previous memo.

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands