Gigaset CX203 isdn Manual Download Page 59

Page: 59 / 168

SMS (text messages)

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / sms.fm / 08.10.2003

Entering the text of the message

Sending a text message as an e-mail

You must send the text messages to the

number for the e-mail service of your send

centre

Receiving text messages, incoming message list

Notes on receiving a text message

New text messages are signalled by a message in the display, flashing of the message

key

and a confirmation tone. The date and time (transferred from the SMS centre)

are indicated for each SMS received.
In the receiving list the new (unread) messages are before the old messages. New and

old messages are sorted according to their time of arrival: oldest new message, ... ,

newest message, oldest old message, ..., newest old message.
Linked text messages are displayed as

one

SMS. If an incoming linked message is too

long or has not transferred completely, it will be split into individual messages and

stored in the incoming message list.

Opening the incoming message list

The

incoming message list

shows you:

◆

all received messages,

◆

messages that could not be sent despite several attempts. These messages are all

stored with an error status (page 60).

Enter the SMS text.

Press the display key to open the submenu.

Send

Confirm.

[email protected]
Hallo Peter

X W

Email address, space, SMS

text (example)

Enter the number of the e-mail service.

Press the display key to open the submenu.

Send

Confirm.

Dest.call no.

6245

X W

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands