Gigaset CX203 isdn Manual Download

Page: 83 / 168

Setting the answering machine (on CX253isdn)

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / answeringm_config.fm / 08.10.2003

Activating/deactivating automatic pause

If automatic pause is activated the answering machine switches to pause mode after

playing back a message or memo. The next message will not be played back until you

press the

display key or the

key.

When the phone is supplied automatic pause is deactivated.

Precondition:

You have selected an answering machine (page 62).

Locking the answering machine, defining AM PIN

You can protect your answering machine against unauthorised access. To do this, define

an AM PIN (Personal Identification Number) and activate the AM- lock. The settings may

then only be changed and the messages played back after the PIN has been entered.

Entering and changing the AM PIN

When supplied, the AM PIN is preconfigured to 0000.

Precondition:

You have selected an answering machine (page 62).

If you make an error when keying in the AM PIN you can delete your entry using the

key and enter it again.

Activating/deactivating the AM lock

When the phone is supplied the answering machine lock is deactivated.

Precondition:

You have selected an answering machine (page 62).

Settings

Select the menu item and confirm.

Automatic pause

Select the menu item and confirm (

‰

= activated).

Hold

down (back to idle status).

The answering machine can only be controlled remotely if you have

defined an AM PIN.

Settings

Select the menu item and confirm.

Change AM-PIN

Select the menu item and confirm.

Enter new AM PIN (max. 8 digits) and confirm.

Repeat the new AM PIN and confirm.

Settings

Select the menu item and confirm.

AM lock

Select the menu item and confirm (

‰

= activated).

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands