Gigaset CX203 isdn Manual Download Page 51

Page: 51 / 168

SMS (text messages)

Gigaset SX353 / englisch / A31008-X353-B100-1-7619 / sms.fm / 08.10.2003

Ask your service provider,

◆

what charges are billed for sending and receiving a text message,

◆

which mobile phone operators you ca send text messages to and which mobile

phone operators you ca receive text messages from,

◆

which functions your SMS service offers,

◆

how you are registered with SMS centres for which your phone may already be pre-

configured – automatically by sending a message or by a special registration

procedure.

Managing SMS service centres

SMS messages are exchanged through SMS service centres. To send and receive a text

message, you require the phone number for your service provider's SMS centre. You

have to store this phone number in your telephone.
You may enter up to ten SMS centres in your telephone.

Sending an SMS – send centre

You must enter the phone number of the SMS centre via which you want to send the

SMS in your telephone and activate it as the "send centre" (page 48 and page 49). This

phone number will be used for sending all SMS messages.
By default, the "Anny Way" SMS centre has already been entered (number 0190 01504)

and activated as the send centre. This means that, in Germany, you may send text

messages immediately.
You can activate another SMS centre as your send centre. The send centre that was

activated previously is then automatically deactivated.

Receiving an SMS

Text messages can be received via all SMS centres entered, assuming you are registered

with these SMS centres as an SMS recipient (for information about registering, see

page 50).

Summary of Contents for CX203 isdn









































































































































































Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands

Gigaset CX203 isdn, Manual

Search results

Summary of Contents for CX203 isdn

Reviews:

Related manuals for CX203 isdn

Brands by name

Popular brands