Gigamon GFM-HW1-FM010 Appliance Manual Download Page 5

Page: 5 / 103

8 x 2.5-inch drive system

Item

Ports, panels,
and slots

Icon

Description

Left control
panel

N/A

Contains the system health and system ID, status LED, and the
iDRAC Quick Sync 2 (wireless) indicator.

●

Status LED: Enables you to identify any failed hardware

components. There are five status LED’s and an overall system
health LED (Chassis health and system ID) bar. For more
information, see the Status LED indicators section.

Optical drive
(Not Installed)

N/A

Slot for slim SATA DVD-ROM drive or DVD+/-RW drive.

VGA port

Enables you to connect a display device to the system.

Right control
panel

N/A

Contains the power button, USB port, iDRAC Direct micro port, and
the iDRAC Direct status LED.

Drive slots

N/A

Enable you to install drives that are supported on your system.

Left Control Panel View

Item

Indicator, button, or connector

Icon

Description

Status LED indicators

N/A

Indicate the status of the system.

System health and system ID indicator

Indicates the system health.

Status LED indicators

OTE

The indicators display solid amber if any error occurs.

Table 5. Status LED indicators and descriptions

Contents

GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010

Summary of Contents for GFM-HW1-FM010








































































































Search results

Summary of Contents for GFM-HW1-FM010

Reviews:

Related manuals for GFM-HW1-FM010

Brands by name

Popular brands

Gigamon GFM-HW1-FM010, Appliance Manual

Search results

Summary of Contents for GFM-HW1-FM010

Reviews:

Related manuals for GFM-HW1-FM010

Brands by name

Popular brands