1. Using a Phillips #2 screwdriver, remove the screw that secures the PERC card to the
internal PERC riser.
2. Pull the PERC card out of the connector on the internal PERC riser.
After removing the PERC card from the Internal PERC Riser you could do the following:
1. Install the PERC card into the internal PERC riser.
2. Replace the air shroud.
3. Follow the procedure listed in
After working inside your system
.
Installing PERC card into the Internal PERC riser
l
Follow the safety guidelines listed in
Follow the below steps to install the PERC card from the Internal PERC Riser:
1. Insert the PERC card into the internal PERC riser and push the card in.
2. Using a Phillips #2 screwdriver, replace the screw to secure the PERC card on the
internal PERC riser.
Contents
49
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010
