Gigamon GFM-HW1-FM010 Appliance Manual Download Page 21

Page: 21 / 103

Follow the below steps to remove the System Cover.

1. Using a 1/4 inch flat head or a Phillips #2 screwdriver, rotate the latch release lock
counter clockwise to the unlocked position.

2. Lift the latch till the system cover slides back and the tabs on the system cover
disengage from the guide slots on the system.

3. Hold the cover on both sides, and lift the cover away from the system.

Installing the system cover

Follow the safety guidelines listed in

Safety instructions

Ensure that all internal cables are routed correctly and connected, and no tools or
extra parts are left inside the system.

Follow the below steps to install the System Cover:

1. Align the tabs on the system cover with the guide slots on the system.

2. Push the system cover latch down.

The system cover slides forward, the tabs on the system cover engage with the guide
slots on the system and the system cover latch locks into place.

3. Using a 1/4 inch flat head or Phillips #2 screwdriver, rotate the latch release lock
clockwise to the locked position.

Contents

GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010

Summary of Contents for GFM-HW1-FM010








































































































Search results

Summary of Contents for GFM-HW1-FM010

Reviews:

Related manuals for GFM-HW1-FM010

Brands by name

Popular brands

Gigamon GFM-HW1-FM010, Appliance Manual

Search results

Summary of Contents for GFM-HW1-FM010

Reviews:

Related manuals for GFM-HW1-FM010

Brands by name

Popular brands