3. If you are using an existing heat sink, remove the thermal grease from the heat sink by
using a clean lint-free cloth.
4. Use the thermal grease syringe included with your processor kit to apply the grease in
a quadrilateral design on the top of the processor.
CAUTION: Applying too much thermal grease can result in excess grease coming in
contact with and contaminating the processor socket.
N
OTE
:
The thermal grease syringe is intended for single use only. Dispose the
syringe after you use it.
5. Place the heat sink on the processor and push down on the base of the heat sink until
the bracket locks onto the heat sink.
N
OTE
:
●
Ensure that the two guide pin holes on the bracket match the guide
holes on the heat sink.
●
Do not press on the heat sink fins.
●
Ensure that the pin 1
indicator on the heat sink is aligned with the pin 1 indicator on the bracket before
placing the heat sink onto the processor and bracket.
Contents
45
GigaVUE-FM Hardware Appliance Guide for GFM-HW1-FM010
