ProfiLux 4 Resource Guide
EN
2018-13-11
28
Dose overview: Used for programming GHL dosing pumps and traditional
dosers such as BRS dosers. Clicking on the (+) icon will display all 16 dosing
pumps which can be controlled by the ProfiLux.
Extras: Clicking the (+) icon will display options for flow pump control,
maintenance modes, and feed pause settings.
Probe/sensor controls: Clicking the (+) icon will display all probes and level
sensor options. ATO and AWC functions are also setup from here.
Display: Provides an overview of what can be displayed on the ProfiLux 4 front-
display. Display brightness is also adjusted here.
System: ProfiLux system options. This section is used for configuring network
settings, assigning PAB-devices, performing updates for PAB-devices, and
configuring myGHL settings.
i.
Clicking on the (+) icon will display the SWITCH CHANNELS AND
OUTLETS option which is used for assigning functions to specific
Powerbar sockets.
B.
Basic information such as current firmware version, device serial number, and controller
language can be seen here.
C.
ProfiLux internal clock settings. If need be, you can adjust the clock settings to match
your time zone.
D.
Latitude and longitude information can be entered here.
E.
ProfiLux general alarm settings. You have the option to set the alarm to audible or
silent. If you choose to have an audible alarm, you can also specify the times for when
the alarm should make a sound.
F.
You can change the behavior of the GHL LED logo light on your device using these
settings. More information on this can be found
Illumination – Light Composer
Here is where you can create and adjust your light schedule for the GHL Mitras LX6, LX7, and
Lightbar2.
TIP
When it comes to light customization, Light Composer is unmatched. See
how to create your own light schedule by clicking the link below.
How to create a light schedule w/ Light Composer:
