ProfiLux 4 Resource Guide
EN
2018-13-11
86
6.
Set the
Max. duration
for this maintenance mode.
240 minutes (4 hours) is the maximum allowed time.
7.
Click SAVE CHANGES.
How to setup ATO control (1 or 2 sensors)
This section will show you how to setup and assign an ATO function to an outlet on your
Powerbar. First, you will create the function, then you will assign the function to an outlet on
your GHL Powerbar.
In order to setup ATO control, you will need certain items. These items can be purchased at
your preferred GHL dealer:
ATO w/ 1 sensor
ATO w/ 2 sensors
PL-1095 PL-LF-Base 2 (Assembly rod)
PL-0077 Float sensor OR PL-0082
Optical sensor
PL-0723 PL-LF-S12 (For optical
sensor)
PL-0080 PL-LF-S8 (For float sensor)
PL-1095 PL-LF-Base 2 (Assembly rod)
Any combination of 2 sensors:
PL-
0077 Float sensor OR PL-0082 Optical
sensor
PL-0723 PL-LF-S12 (For optical
sensor)
PL-0080 PL-LF-S8 (For float sensor)
