ProfiLux 4 Resource Guide
EN
2018-13-11
83
TIP
This feature can be used to turn off your skimmer, return pump, or any
device connected to a powerbar outlet. You can also configure flow pumps to
turn off or run at minimum speed during FP. This option is available in the
STREAM GROUP settings page and will not be covered in this section.
SHORTCUT KEY
for Feed Pause
Feed pause can be activated by pressing the (X) key on the ProfiLux 4
controller. Select which FP to activate and the function will be enabled.
To setup a Feed pause function, please follow these steps:
CREATING THE FUNCTION
1.
Click on the (+) icon to the left of
Extras
and select FEED PAUSE.
2.
Select a Feed pause and specify the FP duration by clicking 3-times in the
Duration
Feedpause [Min]
column.
3.
If you’d like to have this Feed pause activated by a TIMER function, select the TIMER
function number (1-32) which will activate this FP.
If you decide to activate a FP with a TIMER function, you must specify the time
for when this TIMER shall activate. If you have not yet done so, please go to the
chosen TIMER function, set mode to EVENT START, click NEW and specify at
what time this TIMER should activate the Feed Pause.
If you prefer to NOT have a TIMER activate this FP, select NONE. By selecting
NONE, the FP will only be activated after you MANUALLY activate the function.
4.
Type in a description for this FP.
