GHARiENi 601 Instruction Manual Download Page 25

Page: 25 / 82

9. Upholstery

❖

The 601 is available in two upholstery variants (standard and soft / see below).

❖

The upholstery of the 601 is made of polyurethane (PU), artificial leather or

Ferrari Stamskin and is delivered in the colors white or chocolate as standard.

❖

Additional colors from our color collection for PU, artificial leather or Ferrari

Stamskin upholstery are optionally available for an additional charge.

STANDARD UPHOLSTERY MADE OF POLYURETHANE

(

ARTIFICIAL LEATHER OR

ERRARI

TAMSKIN

❖

The

STANDARD UPHOLSTERY

consists of a soft, comfortable, and high quality

one-piece cushion (see figure below).

❖

The inner material of the upholstery is made of high quality foam.

❖

The outer material is made of

polyurethane (PU)

or Ferrari Stamskin and is

available in different colors from our color collection for PU, artificial leather,

or Ferrari Stamskin upholstery.

❖

This material (PU) is elastic and easy to care for. It is impermeable to water,

impermeable to oil and washable up to 90 °C.

Illustration similar: color and design may vary depending on the model.

SOFT UPHOLSTERY MADE OF POLYURETHANE

(

)

ARTIFICIAL LEATHER

ERRARI

TAMSKIN

❖

The

SOFT UPHOLSTERY

consists of a comfortable, ergonomic, and high quality

one-piece cushion (see figure below).

❖

The soft upholstery is shaped to fit the body.

❖

The inner material of the upholstery is made of high quality foam.

❖

The outer material is made of

polyurethane (PU),

artificial leather or Ferrari

Stamskin and is available in different colors from our color collection for PU,
artificial leather, or Ferrari Stamskin upholstery.

❖

This material (PU) is elastic and easy to care for. It is impermeable to water,

impermeable to oil and washable up to 90 °C.

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands