50
T 7
PROGRAM BUTTON P
1
➢
PROGRAM BUTTON P
1 moves the 601 to the fixed
entry position.
➢
The entry position cannot be changed.
T 8
PROGRAM BUTTON P
2
➢
PROGRAM BUTTON P
2 moves the 601 to the fixed S-curved
position.
➢
The S-curved position cannot be changed.
T 9
BUTTON FOR THE HEATING SYSTEM
➢
With this button you can switch on the heating system,
set it in 3 levels and switch it off again.
➢
Please refer to the table in chapter 13.1
OPERATION
.
T 10
LOCK BUTTON
➢
The
LOCK BUTTON
locks or releases the foot control / drives.
1
RESET
➢
Press buttons
T 8 and T 9
and hold them down
simultaneously
for approx. 3 seconds until a successful reset process is indicated
by the LED in the upper area of the hand control flashing three
times and with the LED module.
➢
The software is reset to the initial state.
Summary of Contents for 601
Page 33: ...32 ...
Page 58: ...57 ODER FIG 16 FIG 17 ...
