GHARiENi 601 Instruction Manual Download Page 39

Page: 39 / 82

10.8 Arm supports

❖

The arm supports (see figure in chapter 10.4

VIEW

) are always parallel to the

seat.

❖

For lateral access and for treatments in the massage position (prone position)

they can also be

swiveled down by 180°

; see illustration.

❖

They can also be pulled out manually.

To swivel the arm supports, proceed step by step as follows:

•

Loosen the knurled screw underneath the arm support.

•

Pull out the arm support to the side so that the arm support cannot

collide with the seat when swiveling.

•

Swivel the arm support backwards, respectively downwards by applying

gentle pressure.

•

Slide the arm support back up to the bed.

•

Tighten the knurled screw.

➢

The arm supports are optionally available.

NOTICE!

Make sure to pull out the arm supports using the knurled screw

before swivelling them; otherwise you may permanently damage the
upholstery of the bed! RISK OF DAMAGE!

WARNING!

When swivelling the arm supports and pushing the arm

supports towards the bed, make sure that there are no body parts or
objects in between. RISK OF CRUSHING!

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands